Care & Cleaning

Proper cleaning and care help keep your CUPSLAND products in good condition and ready for your next use. Follow the guidelines below to clean, dry, and store your devices and accessories.

Always check your product's specific instructions before cleaning, as materials, removable components, and water resistance may vary.

1. Before You Begin

Before cleaning any CUPSLAND product:

  • Turn off the device and disconnect it from its charger.
  • Remove washable components only as instructed.
  • Keep electronic components and charging ports away from water unless the product instructions explicitly state otherwise.
  • Avoid harsh chemicals, abrasive cleaners, and excessive heat.
  • Make sure all cleaned parts are completely dry before reassembly or storage.

 

2. How to Clean Your Male Masturbator

For CUPSLAND models with a removable inner sleeve and vibration module, follow these four basic steps.

Step 1 — Remove the Inner Sleeve

Carefully remove the inner sleeve from the device according to the product instructions.

Step 2 — Remove the Vibration Module

Remove the detachable vibration module before washing the sleeve. Keep the module and other electronic components away from water.

Step 3 — Rinse Thoroughly

Rinse the washable inner sleeve thoroughly with water, including the internal channel, to remove any remaining lubricant or residue. Use only cleaning products approved for the sleeve material.

Step 4 — Dry Completely

Allow the sleeve to air-dry completely, inside and out. Use a compatible drying stick if available. Reassemble only when all components are fully dry.

Important: Do not immerse the main device or electronic components in water unless the specific product instructions confirm that it is safe.

 

3. How to Clean Your Hands-Free Belt

CUPSLAND hands-free support belts require simple surface care.

Step 1 — Remove the Device

Detach the masturbator or any other attached accessory before cleaning.

Step 2 — Wipe Gently

Use a soft, slightly damp cloth to wipe the belt, straps, and support surfaces.

Step 3 — Let It Dry

Allow the belt to dry completely before storing or using it again.

Do not soak the belt, machine-wash it, or expose it to excessive heat unless the product instructions specifically allow it.

 

4. How to Care for Hands-Free Stands & Machines

Hands-free stands and powered machines may contain adjustable joints, mounting components, and electronic parts that require different care methods.

Clean Removable Components

If the product includes a removable, washable sleeve or attachment, detach and clean it according to its specific instructions.

Wipe the Exterior

Use a soft, dry or slightly damp cloth to clean the exterior surfaces. Avoid getting moisture into controls, charging ports, joints, or electrical connections.

Check the Support System

Inspect adjustable joints, locking mechanisms, mounting surfaces, and suction components for dirt, damage, or looseness before use.

Dry Before Storage

Make sure all components are dry before reassembly or storage. Follow the product manual for any additional maintenance requirements.

Cleaning methods may vary by model. Refer to the instructions supplied with your product.

 

5. Lubricant & Everyday Care

Choosing compatible lubricant and following a regular care routine can help maintain your product.

Choose Compatible Lubricant

Water-based personal lubricant is generally a suitable option for many soft sleeves, but compatibility depends on the specific material. Check your product instructions before use.

Explore CUPSLAND Water-Based Lubricant

Clean After Each Use

Clean washable sleeves and other applicable contact surfaces after each use, following the product's care instructions.

Avoid Harsh Cleaning Products

Do not use alcohol, bleach, strong solvents, or abrasive cleaning tools unless explicitly approved for the product.

Store in a Cool, Dry Place

Keep your products away from direct sunlight, excessive heat, and moisture. Make sure washable parts are completely dry before storage.

Check Your Product Regularly

Inspect sleeves, straps, connectors, and other components for visible wear or damage. Stop using damaged components and contact support if assistance is needed.

 

6. Frequently Asked Questions

Can I wash the entire automatic masturbator?

Not necessarily. Many automatic devices contain electronic components that should not be submerged. Remove and clean only the washable parts identified in your product instructions.

Should I remove the vibration module before washing?

Yes, for CUPSLAND models with a detachable vibration module, remove it before washing the inner sleeve. Follow your specific model's instructions.

Can I use soap to clean the inner sleeve?

Cleaning-product compatibility depends on the sleeve material. Use water and only cleaners specifically approved for your product. Avoid harsh or strongly fragranced products.

How often should I clean my masturbator?

Clean the washable sleeve after every use. Regular cleaning helps remove lubricant and residue.

Can I put my hands-free belt in the washing machine?

No. For CUPSLAND hands-free support belts, use a soft, slightly damp cloth for surface cleaning. Do not machine-wash or soak unless the product instructions explicitly allow it.

What should I do if the sleeve is still damp?

Allow it to air-dry completely before reassembly or storage. Pay particular attention to moisture inside the sleeve.

How should I store my CUPSLAND products?

Store them in a clean, cool, dry place away from direct sunlight. Keep all washable components completely dry and avoid placing heavy objects on soft sleeves or delicate parts.

 

7. Need Help With Your Product?

Have questions about cleaning, maintenance, or product care? Our support team is here to help.

Please include your product model and a description of the issue when contacting us.

Email: support@cupsland.com

Contact Support: https://cupsland.com/pages/contact